« Clarification: The RogueMechanic Ideology, of sorts. | Main | My take on the new Campagnolo Power Torque System »

November 15, 2010

TrackBack

TrackBack URL for this entry:
http://www.typepad.com/services/trackback/6a00d834525fac69e20133f5deaea4970b

Listed below are links to weblogs that reference Mavic Ksyrium Freehub Parts and Zicral Spokes:

Comments

Arnim Polster

Hello Rogue,
I have an older set of Kysrium SL wheels, probably from 2006 or 2007. The freehub body is worn out and needs to be replaced - there is play in several of the cassette cogs. Can i use a newer freehub body (and do you stock those)? The new ones look quite different from the one on my wheel. If not, i.e. I need an older freehub body, do you have one I could order (Shimano-compatible) ?
Thanks!
Arnim

RogueMechanic

Hello Jason, If you just broke a spoke, it's very simple to replace. If the spoke or nipple is frozen in the rim, it's can be a little more difficult but can definitely be done. Maybe they just don't have or want to get the replacement spoke? I believe that I have them available on my on-line site... I hope that this info helps. Thanks for writing! -John

Jason Robinson

Hi,
I've just blown a spoke from a Mavic Ksyrium Anniversary wheel. I've been to 3 shops in Germany and Switzerland and no one will have anything to do with it. Is that because it can't be done (as they say) or is it more likely they don't want to do it? If it's possible I'll keep asking, but if this is a dead end it would helpful to know. Cheers, Jason

RogueMechanic

Hello Nicholas, Unfortunately, I am not able to get that rim. If it's for a wheel that's newer than 2006, your local Mavic dealer should be able to order it for you. Thanks for writing! -John

Nicholas

Hi, can you get Ksyrium SL SSC rear rims?

טויוטה לנד קרוזר

Nice parts shared by you. I feel fairly strong about this and would like to read more. Stay up the good work!

RogueMechanic

Hello Gary,
I checked in my vast inventory of Mavic parts and I do not have that part and I doubt that Mavic would have it because they do not stock parts for products older than 2005. Did you check ebay? Might be worth a shot. Thanks for writing! -John

Gary Gerard

Howdy - I have a pair of 2003 Mavic Kysrium Elite wheels. I need a new or used Axle for the front hub. Do you sell this part? How much with shipping to 93619.

dinandar

I need some spokes for my Kryrium SL wheels . do you stock rear-right spoke ? where are store in south east asia?

Jeffx

is there a trick to removing the mavic freehub seal, and does it have to replaced with a new one when removing a single drive side spoke?

RogueMechanic

Hello,
Yes, I have most of them in stock. They're $5.00 each. Click on the yellow box in the right column to go to the online store. Thanks for writing! -John

R T Foster

I need some spokes for my Kryrium SL wheels . do you stock them and how much are they?

RogueMechanic

Hello Randy,
The conversion is easy...all you have to do is replace the Shimano freehub body with a Campy FHB. Here's a link where you can get it from... http://roguemechanic.bigcartel.com/product/mavic-campagnolo-10-freehub-body
Thanks for writing! -John

randy root

Hi -

I need to convert my Ksyrium SSC (~2006) freehub from Shimano to Campy. Can you help?

thanks

Stu Harmer

Hi Rogue,

i read all the posts with interest. I have a set of Ksyrium SL 2008-9 model with SRAM Red. I have the " Death Squeal" problem so many people speak of, 3 different bike shops claimed to have fixed the squeal, but nooooo. Anyhow after reading your blog i grabbed my cassette and it had some serious play! So i pulled the lot down and and swapped over a free hub body from a set of other Ksyriums (which had no fly play in the cassette at all, and guess what? Still heaps of free play!!! So, how about this for a theory, what if the aluminium of the actual hub that the teflon free hub spins on wears down?? It has to have, otherwise why does a "in spec" free hub body all of a sudden have play when fitted to my problem Ksyriums? Really appreciate your thoughts on this. Cheers.

randy

I need a ksyrium sl front hub end cap end cap only

If you have one tell me how much . I can paypal + shipping

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been saved. Comments are moderated and will not appear until approved by the author. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Post a comment

Comments are moderated, and will not appear until the author has approved them.

RM Store

Tweet!!

Client Testimonials...

  • A.R. said...
    " Dear John, I got out tonight for a quick ride... The Trek ran like a top, like butter on a hot skillet, smooth like a baby's bottom, like a shot of Johnnie Walker Blue, . . well you know what I'm trying to say, like a brand spanking new 5.9 Madone! Thank you again for another job well done! Your grateful customer and greatest billboard, A.R"
  • PR said...
    "My search for a highly qualified, honest and reliable bike mechanic is over. Not only is John (RogueMechanic) a superb mechanic, he is also very knowledeable about equiptment... I have never been disappointed."
  • Dr. M said...
    "John is a top flight mechanic. His knowledge, expertise and superb customer service surpasses everyone else... His personal integrity and high standards are reflected in his work on my bikes..."